Standard Residential Installation Includes the Following
Free delivery of Your WildBlue Equipment by your Certified installer on the day of installation.
On the day of installation, a free site survey to determine the best location for your new dish.
If we can't get you a signal, you don't pay a dime.
Mounting and grounding the antenna at an approved location at your residence. The location must
have a line of sight to the satellite and it must be accessible with a 25' ladder.
Antenna must be mounted a minimum of 5' off the ground and out of reach of small children.
Wall mounts can not be to surfaces or building materials that can not support the wall mount
for example,stucco,aluminum or vinyl siding).
Drilling 1 exterior and 1 interior point of entry and installing 1 wall jack.
Installing and routing two exterior RG-6 coaxial cables from the antenna assembly, through the
exterior point of entry through the interior point of entry to the wall jack. A standard installation
includes 150' of cable for each cable run.
Connect ground wire from the ground block to a NEC-approved bonding point.
Installing and weather sealing appropriate cable bushing, wall penetrations, and mounting points.
Activating and commissioning your WildBlue system, with your permission.
Demonstrate your WildBlue system is operational by browsing the Internet.
Cleaning up all debris after the installation is complete.
Completing the Installation Leave Behind Sheet and obtaining your signature.
